Eco Network Troubleshooting guide

  • Eco Network Troubleshooting guide

    Eco Network Map.png

    First of all this document is meant as an addition to the server guide here

    I will also refer several times to the image above here, Several computers , phones etc are numbered from 1 to 6. I will refer to these numbers. The map above is help to visualize where we are on the network.

    Hosting a private server just for your self requires to add eco server to the windows firewall while public or private servers that other players outside of your home should have access to require also configuration to your router. Since routers have different configuration methods and pages I wont cover those but I will give an example on standard ASUS routers that are very simple. You need to google how to forward ports for your own router!

    -Setting up the firewall on your server (1)

    !!! 3rd party AntiViruses software or firewall might still block ports even if you open them!!!
    Please configure those software or disable them if needed!

    To get your server configured you need to open some ports before you can start the Eco Server.

    You can find your firewall options in your control panel ( on newer version of windows you can just hit the windows button and search right away for the firewall application)
    Firewall Shortcut.PNG

    When opening the Advanced Firewall settings you are med with a screen that has allot of rules from before. Please select the “Inbound Rules” and click the “New Rule…” button.

    Firewall Overview.PNG

    This will open a wizard. Here you should select that the new rule should be a port rule (Selecting Program might later cause issues when updating the server!)
    Firewall Wizard 1.PNG

    On the next screen you should select TCP and give the rule a specific port range. A "from - to" range can be set with help of the “-“ sign. This means if you like to open port 2999,3000 and 3001 you should write 2999 – 3001 (reference image below)

    Firewall Wizard 2.PNG

    On the next screen you select what to do with these ports. Here you should let the default “Allow the connection” stay and click to the next screen.

    Firewall Wizard 3.PNG

    For the next screen let all items remain checked ( All of them should be selected by default!)

    Firewall Wizard 4.PNG

    Finally you need you need to name your rule. Good naming practice now, will make it much easier to find the correct rule later; should you need to make adjustments.

    Firewall Wizard 5.PNG

    Forwarding your router ports (4)

    To give other people access to your server you need to tell your router how to handle incoming request from certain port that come from an external computer like a friend that is living in another town (6).

    Router Forwarding.PNG

    On an Asus router you can find these settings under Wan -> Virtual Server / Port Forwarding.
    ( I censored my own setup to keep my server secure but this should give some idea).
    First of all you need to set a name (Service name ) . The next item is the port range, on my router I would write 3000:3001 to give it the right range .
    Next item is the local IP. This should be your server iIP (1) my IP would be
    The next thing is the Local port, normally this should be blank.
    The last item is what protocol.. Right now we only need TCP since eco does not use UDP.
    To save these configurations I need to hit the + sign and then save the configuration.


    Normally if you did the above as described you should now have a server that people could access.

    If not, you need to troubleshoot to find out where the issue is.

    • Check if your server is running properly.
    On your server(1) open your browser and type Localhost:3001

    If your unable to see the your eco server site you might need to start the server as an administrator. Other possible issue can also be an outdated .net installation. Its recommended to have at least .net 4.6.2 or higher !, you can download .net 4.6.2 from here

    • Repeat the same thing but from a different computer (2) or phone (3) that is connected via cable or WiFi to the same local network. You will need to write the server address this time in your local browser instead of local host. In our case I would write

    If you are unable to see the eco server status page you have not opened your local firewall. Remember that external antiviruses like AVG , Kaspersky etc running on your computer that host the Eco server might still block your ports. Disabling or uninstalling would be the simplest solution here. Another cause could also be that you have not configurated the right ports. (in future you might also need to open UDP ports instead only TCP ports ).

    • So far so good. most likely your local network is now working properly but other people can't still see your server. First of all check if you can access the server page again. For this you need a device(5) or computer(6) that is not connected to your local network. You also need to know your external IP address. You can find your external IP address by visiting this site from any device or computer on your local network (1),(2) or (3). You can find your external / public IP here . I should try to connect via my external phone(5) or computer (6) with the web browser to the address

    If I am able to connect but I cant see the server in the server browser you might have forgotten to set your server in the server configuration to public. This can be done via the Eco Server GUI under Network/Config/ServerIsPublic set to true. If you are unable to access the eco server status site from an external Device (5),(6) you have most likely miss configurated your router and need to reconfigure or restart your router. There is not allot more to this actually .. in most cases it is this simple.
    If you have additional questions or issues please search and post on the forums and if your issue is still unresolved or send a message to Eco Support at

Log in to reply